Stability Chamber

USAGES:-

Stability chambers are environmental test chambers used to test the effects of specific environmental conditions on products and specimen. By allowing precise control and consistent temperature and moisture conditions within the chamber, a researcher can use the stability chamber to measure the effects of humidity and temperature on objects by manipulating these factors.

CONSTRUCTION :-

    Outer double wall door is provided with magnetic gasket and lock & key arrangement. Inner door of our stability chamber is made of clear acrylic sheet of glass allowing inspection of material in the chamber without disturbing the chamber temperature. Door operated inner illumination has been provided. The gap between walls of equipment are filled with PUF (poly urethane form) which insures maximum thermal efficiency as well as reduce power consumption in our Stability chamber. Air circulation fan provided to make air circulation throughout the chamber. The temperature can be regulated within the range by means high precision double action controller. Castor wheel for easy movement. Fins type S.S tubular heater for stabilized accurate process temperature. A control panel is provided with various indicators lick ON/OFF switch cord plug, Heater indication lamp, etc.

TECHNICAL FEATURES

• 25 C – 60 % RH/40 C – 75% RH/30 C – 65%RH / 25 C- 40 % RH/40 C – 25% RH/ 30 C –35% RH.
• Humidity range: 25% to 95 % RH. Accuracy / Uniformity+ 2% RH+3%RH
• Temperature / humidity display: Digital LED 3 1/2digit
• Control: – microprocessor based PID controller With auto tune.
• Resolution: – 0.1 C/ 1 % RH
• Temperature sensor: – PT100
• RH sensor: – Direct capacitance type.
• Heating: ‘U’ shaped NICROME wire heater in SS sheathing
• Cooling: CFC free Copeland make compressor utilizing eco friendly refrigerant, with condenser, motor & relay.
• Steam injection: – boiler with reservoir made of thick SS, with heater, water inlet control, low water level safeguard.
• Air circulation: – flange motor with impeller/ blower
• Construction: – Double wall, with insulation, outer door key lockable, inner glass viewing door
• Chamber illumination: – fluorescent light with door switch or 15 watt bulb for clear vision (As per the model.)

 OPTIONAL FEATURES :

• Added Dehumidification
• Extended Temperature And Humidity Ranges
• Stainless Steel / Special Surfaces
• Corrosive Resistant Equipment
• Added Redundancy in Controls and/or Conditioning
• Data Logging and/or Chart Recorders
• Calibration / Validation / Maintenance Services
• Touch Screen Control Interface
• Electronic Door Lock with Data-Logged Access